Huawei eKitEngine AP361 Access Point

Installation Type

Wall

Ceiling (Solid Wall/Gypsum Board/Spring Tee/Flat-Edge T-Rail/Channel Rail/Beam/Threaded Rod)

Dimensions without packaging (H x W x D) [mm(in.)]

Diameter x depth: 180 mm x 35 mm (7.09 in. x 1.38 in.)

Dimensions with packaging (H x W x D) [mm(in.)]

200 mm x 231 mm x 61 mm (7.87 in. x 9.09 in. x 2.40 in.)

Weight without packaging [kg(lb)]

0.45 kg (0.99 lb)

Weight with packaging [kg(lb)]

0.75 kg (1.65 lb)

Storage

NAND Flash 256 MB

Console port

None

Maximum power consumption [W]

9.4 W

Maximum heat dissipation [BTU/hour]

32.1 BTU/hour

Power supply mode

PoE

Rated input voltage [V]

NA

Input voltage range [V]

PoE: 802.3af

Service port surge protection

PoE port:

Service port surge protection

PoE port:Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion BDifferential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B

PoE OUT

Not supported

Maximum number of physical ports on the entire device

GE (RJ45) x 1, 10M/100M/1000M auto-sensing

Long-term operating temperature [°C(°F)]

0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)

Storage temperature [°C(°F)]

–40°C to +70°C (–40°F to +158°F)

Long-term operating relative humidity [RH]

5% RH to 95% RH, non-condensing

Long-term operating altitude [m(ft.)]

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Atmospheric pressure [kPa]

53kPa – 106kPa ETSI 300 019-2-3

Ground

Floating ground

USB

Not supported

IoT slot

Not supported

BLE

Not supported

Radio number

2

Operating frequency band

2.4GHz

5GHz

MIMO spatial streams

Radio 0 (2.4 GHz): 2x2Radio 1 (5 GHz): 2×2

Wi-Fi standard

2.4G: 802.11b/g/n/ax5G: 802.11a/n/ac/ac Wave 2/ax

Radio interface

Built-in smart antennas

Antenna gain

2.4G:4 dBi/chain (peak)2 dBi (combined gain)5G:5 dBi/chain (peak value)3 dBi (combined gain)

Maximum transmit power

2.4 GHz:20 dBm/chain23 dBm (combined power)5 GHz:20 dBm/chain23 dBm (combined power)NOTE:

In V200R024C10 and later versions, the combined power is increased to 23 dBm by default. In versions earlier than V200R024C10, the combined power is only 20 dBm. To increase the transmit power for the AP running an earlier version, install the corresponding patch by referring to the announcement on the official website.

Singal radio transmit power [dBm]

2.4 GHz: 0–20 dBm/chain5 GHz: 0–20 dBm/chainNOTE:

In V200R024C10 and later versions, the transmit power of a radio is increased to 20 dBm per chain by default. In versions earlier than V200R024C10, the transmit power of a radio is only 17 dBm per chain. To increase the transmit power of a single radio in earlier versions, install the corresponding patch by referring to the announcement on the official website.

MTBF [year]

440.3 year

MTTR [hour]

2 hour

Frequency stability [ppm]

+/-20

802.3bt power supply description

No function is limited.

802.3at power supply description

No function is limited.

802.3af power supply description

No function is limited.

DC power supply description

DC power supply is not supported.