Huawei eKitEngine AP761 Access Point

15,900EGP

1 in stock

  • Built-in directional antennas, enabling the AP to work simultaneously on the 2.4 GHz (2×2) and 5 GHz (2×2) frequency bands, achieving a device rate of up to 1.775 Gbps (0.575 Gbps at 2.4 GHz and 1.2 Gbps at 5 GHz)
  • 1 x GE electrical port + 1 x GE optical port
  • 6 kA surge protection for Ethernet ports, IP68 waterproof and dustproof level, and extended operating temperature range from –40°C to +65°C, meeting industrial-grade requirements
  • Working modes: Fit, Fat, and cloud management
Categories: , Brand:
Installation Type
Wall
Pole
Dimensions without packaging (H x W x D) [mm(in.)]
69 mm x 200 mm x 200 mm (2.72 in. x 7.87 in. x 7.87 in.)
Dimensions with packaging (H x W x D) [mm(in.)]
160 mm x 470 mm x 390 mm (6.30 in. x 18.50 in. x 15.35 in.)
Weight without packaging [kg(lb)]
1.91 kg (4.21 lb)
Weight with packaging [kg(lb)]
3.73 kg (8.22 lb)
Storage
NAND Flash 512 MB
Console port
BLE console
Maximum power consumption [W]
17.7 W
Maximum heat dissipation [BTU/hour]
60.4 BTU/hour
Power supply mode
PoE
Input voltage range [V]
PoE: 802.3at/af
Service port surge protection
6 kA in common mode
PoE OUT
Not supported
Maximum number of physical ports on the entire device
GE (RJ45) x 1, 10M/100M/1000M auto-sensing
GE optical port (SFP)
Long-term operating temperature [°C(°F)]
–40°C to +65°C (–40°F to +149°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [°C(°F)]
–40°C to +85°C (–40°F to +185°F)
Long-term operating relative humidity [RH]
0% RH to 100% RH
Long-term operating altitude [m(ft.)]
–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa]
53kPa – 106kPa ETSI 300 019-2-3
Ingress protection level (dustproof/waterproof)
IP68
Ground
Grounding
Antenna port surge protection [kA]
N/A
Wind resistance
67 m/s
USB
Not supported
IoT slot
Not supported
BLE
BLE5.2
Radio number
2
Operating frequency band
2.4GHz
5GHz
MIMO spatial streams
Radio 0 (2.4 GHz): 2×2
Radio 1 (5 GHz): 2×2
Wi-Fi standard
2.4 GHz: 802.11b/g/n/ax
5 GHz: 802.11a/n/ac/ac Wave 2/ax
Radio interface
Built-in directional antennas
Antenna gain
2.4G: 10 dBi
5G: 11 dBi
BLE: 5 dBi
Beamwidth of the built-in antenna [degrees]
2.4 GHz:
Horizontal plane: 65°
Vertical plane: 40°
5 GHz:
Horizontal plane: 65°
Vertical plane: 20°
Maximum transmit power
2.4G: 28 dBm (Max)
5G: 27 dBm (Max)
NOTE:
This is the total MIMO radio power, which is the same as:
2.4G: 25 dBm/chain (Max)
5G: 24 dBm/chain (Max)
BLE: < 10 dBm
Singal radio transmit power [dBm]
2.4G: -10 dBm to 25 dBm/chain
5G: -10 dBm to 24 dBm/chain
MTBF [year]
123 year
MTTR [hour]
0.5 hour
Frequency stability [ppm]
+/-20
802.3bt power supply description
No function is limited.
802.3at power supply description
No function is limited.
802.3af power supply description
Wi-Fi: 2.4 GHz (2×2) + 5 GHz (2×2). The maximum combined power is adjusted to 23 dBm (2.4 GHz) and 23 dBm (5 GHz).
Wired network port: The SFP optical port and GE/PoE_IN work as combo ports, and only one of them is working at a time. If both of them are enabled, the optical port takes effect preferentially.

 

Be the first to review “Huawei eKitEngine AP761 Access Point”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Main Menu

Huawei eKitEngine AP761 Access Point

15,900EGP

Add to cart