Gigabyte H610M S2 DDR4 Motherboard (rev. 1.2)

CPU

1. LGA1700 socket: Support for 13th Generation Intel® Core™ Processors and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors*

2. L3 cache varies with CPU

Chipset

1. Intel^® H610 Express Chipset

Memory

1. Support for DDR4 3200/3000/2933/2666/2400/2133 MT/s memory modules

2. 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory

3. Dual channel memory architecture

4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics

1. 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz

Audio

1. Realtek® Audio CODEC

2. High Definition Audio

2/4/5.1/7.1-channel

LAN

1. Intel® GbE LAN chip (1 Gbps/100 Mbps)

Expansion Slots

1.1 x PCI Express x16 slot, running at x16

* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

(The PCI Express x16 slot conforms to PCI Express 4.0 standard.)

1 x PCI Express x1 slot

Storage Interface

1. 1 x M.2 connector (Socket 3, M key, type 2260/2280 PCIe 3.0 x4/x2 SSD support)

2. 4 x SATA 6Gb/s connectors

USB

1. 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

2. 4 x USB 2.0/1.1 ports on the back panel

Chipset+USB 2.0 Hub:

3. 4 x USB 2.0/1.1 ports available through the internal USB headers

Internal I/O Connectors

1. 1 x 24-pin ATX main power connector

2. 1 x 8-pin ATX 12V power connector

3. 1 x M.2 Socket 3 connector

4. 4 x SATA 6Gb/s connectors

5. 1 x CPU fan header

6. 2 x system fan headers

7. 1 x RGB LED strip header

8. 1 x front panel header

9. 1 x front panel audio header

10. 1 x USB 3.2 Gen 1 header

11. 2 x USB 2.0/1.1 headers

12. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)

13. 1 x serial port header

14. 1 x Clear CMOS jumper

Back Panel Connectors

1. 1 x PS/2 keyboard port

2. 1 x PS/2 mouse port

3. 1 x D-Sub port

4. 1 x HDMI 2.0 port

5. 2 x USB 3.2 Gen 1 ports

6. 4 x USB 2.0/1.1 ports

7. 1 x RJ-45 port

8. 3 x audio jacks

I/O Controller

1. iTE^® I/O Controller Chip

H/W Monitoring

1. Voltage detection

2. Temperature detection

3. Fan speed detection

4. Overheating warning

5. Fan fail warning

Fan speed control

BIOS

1. 1 x 256 Mbit flash

2. Use of licensed AMI UEFI BIOS

3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0