Huawei eKitEngine AP761 Access Point
- Brand: Huawei
15,900EGP
1 in stock
- Built-in directional antennas, enabling the AP to work simultaneously on the 2.4 GHz (2×2) and 5 GHz (2×2) frequency bands, achieving a device rate of up to 1.775 Gbps (0.575 Gbps at 2.4 GHz and 1.2 Gbps at 5 GHz)
- 1 x GE electrical port + 1 x GE optical port
- 6 kA surge protection for Ethernet ports, IP68 waterproof and dustproof level, and extended operating temperature range from –40°C to +65°C, meeting industrial-grade requirements
- Working modes: Fit, Fat, and cloud management
Categories: Access Point, NetWorks
Brand: Huawei
Installation Type |
WallPole |
Dimensions without packaging (H x W x D) [mm(in.)] |
69 mm x 200 mm x 200 mm (2.72 in. x 7.87 in. x 7.87 in.) |
Dimensions with packaging (H x W x D) [mm(in.)] |
160 mm x 470 mm x 390 mm (6.30 in. x 18.50 in. x 15.35 in.) |
Weight without packaging [kg(lb)] |
1.91 kg (4.21 lb) |
Weight with packaging [kg(lb)] |
3.73 kg (8.22 lb) |
Storage |
NAND Flash 512 MB |
Console port |
BLE console |
Maximum power consumption [W] |
17.7 W |
Maximum heat dissipation [BTU/hour] |
60.4 BTU/hour |
Power supply mode |
PoE |
Input voltage range [V] |
PoE: 802.3at/af |
Service port surge protection |
6 kA in common mode |
PoE OUT |
Not supported |
Maximum number of physical ports on the entire device |
GE (RJ45) x 1, 10M/100M/1000M auto-sensingGE optical port (SFP) |
Long-term operating temperature [°C(°F)] |
–40°C to +65°C (–40°F to +149°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
Storage temperature [°C(°F)] |
–40°C to +85°C (–40°F to +185°F) |
Long-term operating relative humidity [RH] |
0% RH to 100% RH |
Long-term operating altitude [m(ft.)] |
–60 m to +5000 m (–196.85 ft to +16404.20 ft) |
Atmospheric pressure [kPa] |
53kPa – 106kPa ETSI 300 019-2-3 |
Ingress protection level (dustproof/waterproof) |
IP68 |
Ground |
Grounding |
Antenna port surge protection [kA] |
N/A |
Wind resistance |
67 m/s |
USB |
Not supported |
IoT slot |
Not supported |
BLE |
BLE5.2 |
Radio number |
2 |
Operating frequency band |
2.4GHz5GHz |
MIMO spatial streams |
Radio 0 (2.4 GHz): 2×2Radio 1 (5 GHz): 2×2 |
Wi-Fi standard |
2.4 GHz: 802.11b/g/n/ax5 GHz: 802.11a/n/ac/ac Wave 2/ax |
Radio interface |
Built-in directional antennas |
Antenna gain |
2.4G: 10 dBi5G: 11 dBiBLE: 5 dBi |
Beamwidth of the built-in antenna [degrees] |
2.4 GHz:Horizontal plane: 65°Vertical plane: 40°5 GHz:Horizontal plane: 65°Vertical plane: 20° |
Maximum transmit power |
2.4G: 28 dBm (Max)5G: 27 dBm (Max)NOTE:This is the total MIMO radio power, which is the same as:2.4G: 25 dBm/chain (Max)5G: 24 dBm/chain (Max)BLE: < 10 dBm |
Singal radio transmit power [dBm] |
2.4G: -10 dBm to 25 dBm/chain5G: -10 dBm to 24 dBm/chain |
MTBF [year] |
123 year |
MTTR [hour] |
0.5 hour |
Frequency stability [ppm] |
+/-20 |
802.3bt power supply description |
No function is limited. |
802.3at power supply description |
No function is limited. |
802.3af power supply description |
Wi-Fi: 2.4 GHz (2×2) + 5 GHz (2×2). The maximum combined power is adjusted to 23 dBm (2.4 GHz) and 23 dBm (5 GHz).Wired network port: The SFP optical port and GE/PoE_IN work as combo ports, and only one of them is working at a time. If both of them are enabled, the optical port takes effect preferentially. |
Be the first to review “Huawei eKitEngine AP761 Access Point” Cancel reply
Reviews
There are no reviews yet.